Amplifier No. 9 is the perfect showcase for KT66s. With no master volume and no tone controls, the preamp section delivers the purest possible signal to the tube-rectified power section, which sings or roars in response to your touch.
Like all BC Audio amps, Amplifier No. 9 is meticulously hand crafted in true point-to-point fashion, and employs 6SL7GT octal preamp tubes for their rich, warm tone and power-tube-like breakup.
● 100% All-tube signal path
● True point-to-point wiring
● 2x KT66 power tubes
● GZ34 tube rectifier
● 4x 6SL7GT octal preamp tubes
● Variable footswitch-activated Boost
● Presence and Depth
● Optional effects loop
● Individual Output Tube Bias
● Impedance selector for 4, 8 or 16 ohm speaker
● 120/240VAC Line Voltage Switch
Power Requirements: 120 VAC, 60 Hz, 2A or 240VAC, 50-60 Hz, 1A (wired for your region)
Size (H x W x D): 9.5” x 26” x 8.75”
Weight: 34 lbs
● Hospital Grade Power Cord
● Printed Owner’s Manual
Accessories ship free when purchased with an amplifier.
Tube sets are fully tested an burned in.
Tube Buffered Effects Loop with Send Level, Return Level and True Bypass switch
High quality 3/8” foam, soft cloth backing
3x 6SL7GT + KT66 Matched Pair + GZ34/5AR4
4x 6SL7GT + KT66 Matched Pair + GZ34/5AR4
ToneQuest Report November 2014
“If you like to rock, you can’t do better than BC Audio, period.
We think you should seriously consider an amp built by Bruce Clement. You certainly won’t have heard anything like it, and that’s an iron-clad guarantee.
Five minutes with [Amplifier No. 9] and you will be walking around the room wondering how you missed this tone all your life. Well, ya did. Get over it.
Amplifier No. 10 is a formidable performance amp, powerful and rich with a tactile feel that is absolutely unequalled.
...like all of Clement’s amps, they bring out the very best in your guitars and your technique. In this regard Clement’s amps are entirely unique and completely manageable for any situation, from quiet listening rooms to outdoor stages. Simply put, you need a BC Audio rig.”