https://mobirise.com/

HOT FOOT

Solo Boost Mod for the THD Hot Plate

The HOT FOOT Solo Boost Mod is a modification performed on your THD Hot Plate that gives it a footswitch-controlled solo boost. With the HOTFOOT, you can turn your Hot Plate up one notch - at any time - using a footswitch!


It works at any attenuation setting. For example, if you have the Hot Plate's attenuation knob set at -8dB, when you hit the footswitch, it goes up to -4dB. Step on the footswitch again and it goes back to -8dB. The knob does not actually move; you get the electronic equivalent of turning the knob.

YOUR TONE IS STILL YOUR TONE

Your tone is completely unchanged by the Hot Foot mod. You get the exact same tone that you get when you turn the attenuation knob by hand. It's just done electronically.

Everything on the Hot Plate works the same as before - the Bright and Deep switches, the bulbs, the Line Out, the fan. In fact, unplug the footswitch cable, and your Hot Plate is back to normal - it operates just as it always has, as if it were unmodded.

EVERYTHING YOU NEED 

Includes:
● LED-illuminated footswitch
● 9VDC power supply
● 25-foot cable to connect the footswitch to the Hot Plate
● Printed Owner’s Manual

You can use the included power supply to power your other 9VDC pedals, or run the HOT FOOT off of your pedalboard power supply (requires 9VDC @ 150mA).

ACCESSORIES

Accessories ship free when purchased with Hot Foot mod

RIGHT ANGLE ADAPTER  $10

Save board space. Use on either end of cable connecting footswitch to Hot Plate.

SPARE FOOTSWITCH CABLE  $25

25 feet long, 1/8" plugs. Connects footswitch to Hot Plate.

Hot Foot demo starts at 2m:05s. Video courtesy of Scott Sill of the Flo Guitar Enthusiasts.

   

BC Audio

San Francisco

415.310.3087


Printable Brochure

Thank you!